AirSystem
I’ve created two types of fully open-source air system to support students in their pneumatics prototyping. Contact me if you want to borrow these (Katrien van Riet in TU/e Teams). If you want to create your own system, check out this page: link.
AirSystem original (Waveshare RP2040 PiZero based)
This system lets you quickly swap out 4 ‘air units’, each consisting of 1 pump, 1 solenoid valve, and 1 pressure sensor, all controlled by a single microcontroller. This is nice for testing shape-changing interfaces, for example, where different areas need to show different inflation/deflation behaviours.
The AirSystem is accompanied by a detailed user manual and Arduino library with example sketches to get you started quickly. Find the documentation here: link.

Airsystem compact (Waveshare ESP32 C3 Zero based)
This system is more integrated, consisting of 2 pumps, 2 solenoid valves, and 2 pressure sensors, controlled by a single microcontroller. This is nice when you want a system that is not too big, although it’s probably still too big to fit inside a smaller prototype. However, you can always put the AirSystem on the side and run silicone tubes to your prototype for actuation. You can swap out the pumps and solenoid valves for other 12V components, if desired, so you have some more freedom in which components you want to use.
The AirSystem is accompanied by a detailed user manual and Arduino library with example sketches to get you started quickly. Find the documentation here: link
